Eddy Current Flaw detector VD-30 Special-purpose eddy current flaw detector ВД-30НК-IVE is designed for detecting surface cracks in components made of ferromagnetic materials with rough-turned plate and curved surface, and, principally, in railway equipment components in accordance with the "Technological Instruction on Tensile Tests and NDE of the railcars' components. 637-96 ПКБ ЦВ".
The flaw detector is intended for running under the laboratory and shop conditions, at overhaul plants of the Ministry for Communication Lines (MPS) and other machine- building enterprises.
Main technical specifications:
Flaw detection threshold (minimal flaw imitator) | (depth x wide) |
For surface roughness up to Rz 320 | up to 3.0 x 1.0 mm |
For surface roughness up to Ra 1.25 | up to 0.5 x 0.05 mm |
Testing surface curvature radius | at least 10 mm |
Probe lift off | up to 3 mm |
Mode of tuning out from influencing factors (surface curvature, piece border, probe lift off, slope angle of a transducer to the surface) | automatic |
Service functions: | Display backlighting. Sound and visual flaw notification. Crack depth evaluation. 5 testing modes. |
Time of continuous operation powered from batteries | at least 25 hours |
Operating temperature range | from -10 to 45 °C |
Dimensions | 157x84x30 mm |
Weight | 0.35 kg | |
Supplement set:
Electronic unit | 1 |
Probe with cable | 1 |
Spare caps for eddy current probes | 5 |
Battery unit (built in) | 1 |
Battery charger | 1 |
Calibration block ОSО2353.01 | 1 |
Lift off imitator | 2 |
Headphones | 1 |
Leather casing | 1 |
Packing case | 1 |
Documentation VD-30NK.23535778.01.00.00PS | 1 | |
Designer and manufacturer STC "Promprylad" Ukraine, 04080, Kyiv-080, P.B. 43 phone/fax: (044) 531-37-26, 531-37-27 EMail: ndt@ln.com.ua
|