High-pressure reactors (or laboratory autoclave press ) manufact

Укр (UA) [/index.php/ua/] Рус (RU) En (En) uoslab UkrOrgSyntez HOME Reactors High pressure reactor (200bar) RVD-1 RVD-2 RVD-3 High pressure reactor (60 bar) RVDS-1 Special Purpose Reactors Hazardous Substance Test Reactor Pressure and Vacuum Test Reactor Optional Equipment Information Information for dealers Information for consumers Our certificates NEWS Contact High-pressure reactors (or laboratory autoclave press) manufactured under the trademark UOS LAB® are intended for carrying out chemical reactions and physical processes under conditions of high pressure and temperature. The capacity of commercial reactors is varied from 20 ml to 5000 ml but it is also possible to manufacture the reactors of greater capacity for customer's specific needs. The effective pressure inside the reactor reaches up to 200 bar, the reheat temperature reaches up to 250°С The standard model of reactor is manufactured of stainless steel AISI 316 " Ti or alloys of Hastelloy depending on conditions of performed reactions, processes or tests. The heat block with electric heating is used for heating the reactor and for cooling the heat block is equipped with water feeding jacket. Having connected intercooled thermostat to the jacket it is possible to reach negative temperatures. The system is equipped with equilibrium distribution of temperature which is controled by temperature controller. Stirring in autoclave presses is performed by overhead stirrer via magnetic clutch or magnetic anchors of magnetic mixer High-pressure reactors have undergone the certification in UkrSEPRO system, they meet the national standards. Declaration of conformance UA.034.D.0514-13, they are manufactured serially, according to 97/23/EC, meet the technical regulations of equipment safetythat works under pressure. The scheme of typical reactor Limited Liability Company ”RESEARCH AND PRODUCTION ENTERPRISE "UKRORGSYNTEZ”, 2000-2014 E-mail : This email address is being protected from spambots. You need JavaScript enabled to view it. tel.:(044)502 20 80 fax.:(044)502 48 32