This version of the page http://www.nak.ua/index.php?id=14&L=2 (0.0.0.0) stored by archive.org.ua. It represents a snapshot of the page as of 2011-01-13. The original page over time could change.
NAK® Company : Hight-, Low-pressure hoses
about company | contacts


Hight-, Low-pressure hoses




High pressure hoses

The high pressure hoses are used for secure of tight joint and compensation of intermixing hydro units in: 

hydro systems; 

hydrostatic transmission of tractors; 

agriculture machines; 

Machinery and other industrial sectors which work on working fluids agents which do not cause the corrosion based on an oil and water.

 

 




Low pressure hoses

The low pressure hoses are assigned for feeding the very abrasive, in purpose of sandblast, shot blasting clearing, for clearing by silica sand, by steal shot, by corundum, by glass and etc.

 

Low pressure hoses also can be used for feeding of plaster, cement, mineral white by the continuous thickening technology method. The shelf life of the hose is secured by inner high quality layer.







Fittings for high pressure hoses

Fittings are assigned for reinforcement of high pressure hoses. We have the possibility to ship and make an reinforcement the hoses by fitting of the following standards: DKOS, DKOL, JIS, JIC, DKI, ORFS, NPTF, BSPT, SFS, SFL, BANJO, CEL, CES and etc.




Fittings for low pressure hoses

Bonds STORZ and CAMLOCK type are assigned for transfer installations for flowable and bulk materials.

 

The main characteristic is simple handling of the construction.  The fittings produced from aluminium, brass and steel.