| |
| DYNAMIX VC-MP/SP |
| Ethernet Extender with Remote Power |
|
Specification | Application
| Ordering information | |
|
|
|
|
| • |
DYNAMIX VC-MP (master) delivers power and IP connectivity for DYNAMIX VC-SP (slave) |
| • |
Combine data and power over single
pair of twist phone wire (UTP Cat 5 or greater) |
| • |
Maximize network uptime and centralize power for all remote devices (DYNAMIX VC-SP + PoE device) |
| • |
DYNAMIX VC-SP delivers power and IP connectivity for PoE devices (IEEE 802.3af) |
| • |
Support 10/100Mbps auto MDI/MDIX Ethernet |
| • |
Support flow control |
| • |
Support long packet up to 1536 byte |
| • |
Support ITU-T G993.1 for VDSL |
| • |
Support 5M/ 15M/ 25Mbps symmetrical bandwidth. Supports auto-speed / fix VDSL speed |
| • |
Configure VDSL speed with the DIP switch (DYNAMIX VC-MP only) |
| • |
Easily add / change to any location over existing wires |
| • |
Reduce engineering time and eliminate new power sources for remote Ethernet devices. |
| • |
IP65-rated metal housing for outdoor locations
- DYNAMIX VC-SP-IP65 |
Back to Top
|
|
|
|
| Standard |
| | IEEE 802.3 for 10BaseT |
| | IEEE 802.3u for 100BaseT(X) |
| | IEEE 802.3x for flow control |
| | IEEE 802.3af for Power-over-Ethernet |
| | ITU-T G993.1 for VDSL |
|
| Interface |
| | DYNAMIX VC-MP (master) |
| | 1 x RJ-45, 10/100Mbps auto-sensing port |
| | 1 x RJ-11 VDSL port with Remote Power for DYNAMIX VC-SP |
| | 1 x DIP Switch (for setting speed mode) |
| | 1 x DC Jack for AC 100~240V / DC 60V/0.83A power adapter |
| | DYNAMIX VC-SP (slave) |
| | 1 x RJ-45, 10/100Mbps auto-sensing with PoE |
| | 1 x RJ-11 VDSL port |
| LED Indication |
| | Power/Remote power for system |
| | Link/Active for Ethernet port |
| | Link/Speed for VDSL port |
| Power protection |
| | Thermal overload protection |
| | OVP (Over voltage protection) |
| | OCP (Over current protection) |
| | Robust short circuit protection |
| | Surge protection |
| Physical & Environmental |
| | Dimensions:
• 146mm x 97mm x 33mm - Dynamix VC-MP
• 169mm x 106mm x 33mm - Dynamix VC-SP |
| | Operating
Temperature:
• 0°С – 50 °С - Dynamix VC-MP/SP
• -20°С – 50 °С - Dynamix VC-SP-IP65 |
| | Storage Temperature: -20°C ~ 70°C |
| | Humidity: 10 to 90% (non-condensing) |

VDSL Ethernet Extender on distance to
1000m (Dynamix VC-MP and Dynamix VC-SP)

Connection removed PoE Ethernet device with Dynamix VC-MP and
Dynamix VC-SP-IP65

DYNAMIX VC-MP (master) delivers power and IP connectivity for DYNAMIX VC-SP (slave).
DYNAMIX VC-SP (slave) delivers power and IP connectivity for PoE devices (for
example: Wireless Access Point or IP Camera).
|
Back to Top |
|
|
|
|
|
DYNAMIX VC-MP
DYNAMIX VC-SP

|
Back
to Top
|
|
|
|
| DYNAMIX VC- MP/SP |
Ethernet Extenders with Remote Power
DYNAMIX VC-MP - master, DYNAMIX VC-SP - slave |
| DYNAMIX VC- SP-IP65 |
Ethernet Extenders with Remote Power
- slave, IP65 |
|
Back to Top |
|
|
|
Also see the products of this group:
|
|
DYNAMIX VC - M/S VDSL modem
(distance up to 1.9 km, transfer rate up to 25 Mbps)
|
|
DYNAMIX VC -S4 4
Band VDSL CPE modem with 4 ports Switch
|
|
DYNAMIX VC2 - M/S VDSL2 modem - router
(distance up to 1,5 km, transfer rate up to 100 Mbps) 4 LAN
|
|
DYNAMIX DV-8 VDSL
IP DSLAM (8 ports VDSL, 2 x 10/100/1000Mbps Ethernet,
25 Mbps)
|
|
DYNAMIX DV-24 VDSL
IP DSLAM (24 ports VDSL, 2 x 10/100/1000Mbps Ethernet,
25 Mbps)
|
|
DYNAMIX UM-V2 Announce
VDSL2 LAN Extender
|
|
DYNAMIX VC-MP/SP New
VDSL Ethernet Extender with Remote Power
|
|
DYNAMIX UR-V8 Announce
8-slot mini-size rack
for DYNAMIX UM-V2 - VDSL2 LAN Extenders
|
|
|