For demanding clients we have the honor to offer setting of the Dutch system of injection of gas of PRINS VSI.
VSI is reduction of the English words the "steam distributed injection" is the last achievement of company
Prins Autogassystemen B.V., leading producer of GBO in Holland.
 |
|
|
| GBO Prins on auto Toyota FJ Cruiser |
GBO Prins on auto Mercedes Benz E420 |
GBO Prins on auto Dodge Magnum 5.7 lt |
This system of GBO is fully integrated with petrol control the system EOBD, emulation of signals, which is forbidden in obedience to the norms of EURO-3, is not required therefore.
The system of GBO PRINS VSI is developed in a close collaboration with the Japanese corporation Keihin
Corp. - by a world leader in making of gas sprayers. Stable work of sprayers of Keihin is guaranteed during 290 million cycles. It approximately corresponds a resource in the 200 thousand kilometres of run.
In combination with the special strategy of GBO PRINS software allows to attain excellent descriptions of work on to gas for cars by power to 400 horsepowers.
Description and descriptions of basic knots of the system of the distributed injection of gas of PRINS VSI.
|
System of successive injection of gas.
With this product the new stage was begun in the production of gas equipment. The system is tuned under EOBD of car and no emulation is required. Communication with the system takes a place through CAN-bus. The system has gomologatsiyu R 67-01 ir R 110.
The Dutch gas equipment of “PRINS” is the best and most reliable to date existent equipment. In the equipment of “Prins” the sprayers of the Japanese production (“Kehin”) are utillized which possess excellent operating qualities. This equipment is fully intended for modern cars the engines of which are made on EURO3, EURO4 to the standards.
|
|
Reduktor
Will transform liquid gas in gaseous. Diminishes pressure of gas given from a bulb to necessary. Corresponds 67Р-01 standards of gas equipment.
Type - diaphragm, odnokamernoe decompressing;
Minimum pressure of entrance - 2 bar (30 Psi);
Maximal pressure of entrance - 18 bar (260 Psi);
Working pressure - 0,6 bar (9 Psi) to 1,6 bar (23 Psi);
The utillized fuel is liquid gas (LPG);
Exhaust of gas is a diameter of 16мм;
Connection of cooling is a diameter of 16мм;
Mass of 2,1kg (with a closing valve);
the Working temperature - between -40°C and 120°C;
Maximal working pressure - 4,5 bar (65 Psi) on R67; |
|
Sprayers.
Injects gas in every cylinder. Made a company Keihin Corp. sprayers are assembled in blocks from 2, 3, 4, 5, by 6 sprayers. Excellent linear descriptions. Ideal work and longevity is guaranteed (290 mln cycles).
Working temperature - between -40°C and 1
|
|