This version of the page http://www.godynamix.com/prod/shdsl/e_um_ntul.htm (0.0.0.0) stored by archive.org.ua. It represents a snapshot of the page as of 2009-07-11. The original page over time could change.
DYNAMIX UM SN/Ethernet - SHDSL modem with Ethernet interface - SHDSL modems, routers
 

Home | Products | Support | Company |  News  |  Contact 

       
 
DYNAMIX UM SN/Ethernet  
SHDSL modem with Ethernet interface
Specification | Application | Ordering information

 

  Dynamix UM-SN/Ethernet , SHDSL NTU Ethernet interface AC input with LCD display is the perfect choice for users and service providers and offers customers premises to high-speed TDM services with an RJ-45 interface. The industry standard RJ-45 interface can be configured as an Ethernet connection. The RJ-45 connection transfers data up to 2.304Mbps. 

  Dynamix UM-SN/Ethernet SHDSL NTU can be configured and managed via EOC, or menu-driven VT100 compatible Asynchronous Terminal Interface, either locally or remotely. 

  Dynamix UM-SN/Ethernet is equipped with an auto rate capability that identifies the maximum line rate supported by the copper loop. This powerful automatic configuration capability makes installation and service provisioning simple and painless. Further flexibility is provided in the ability to manually set the maximum NTU speed at different levels for different customer-tailored service offerings.
User's manual
             
Quick start
      
Standard G.shdsl (ITU G.991.2) supports for improved reach/speed and greater interoperability 
Fast and cost-effective provisioning of traditional frame relay (FR or T-HDLC) or TDM leased line services 
User existing copper loop infrastructures
Can operate back to back connection 
Efficient single wire pair usage
Up to 2.3Mbps symmetric service bit rate
Auto rate installation maximizes data rate based on loop conditions
Local management interface with LCD display
Remote line loopback
SHDSL Line performance monitoring
Raw and per time interval statistics
Back to Top  

Network Interface
 Line Rate: SHDSL per ITU G.991.2  
 Coding: Trellis coded pulse amplitude modulation 
 Support: ANSI (Annex A) and ETSI (Annex B) 
  Payload rates: 192kbps to 2.304Mbps N x 64kbps (N=3 to 36)
 Connection: RJ-45 jack (2-wire)

LAN Interface
 Connection: RJ-45 for Ethernet
  10/100 Base-Tx Ethernet I/F
 Bridging: Transparent Bridging & Learning

DSL Timing
 Network
  Internal 
  DTE

Performance Monitoring
 ES, SES, UAS, Alarms, Errors for SHDSL

Loopback Tests
 Local Loopback
  Digital Loopback 
  Remote Loopback 
  V.54 Loopback 
  Build-in 211-1 bit tester 

Management
 Configuration with keypad and LCD display 
  Console port 
  Support firmware upgradeable 

Physical/Electrical
 Dimensions: 19.5 x 4.8 x 16.8 cm
 Input: 90~240VAC with 50~60Hz
  Power Consumption: 10W Max 
 Operation: 0 to 50°C 
 Humidity: Up to 95% (non-condensing) 

Back to Top  

Connection "Point-to-Point"

Connection with G.SHDSL rackmount DYNAMIX 3000

Ââåðõ 
DYNAMIX UM SN/Ethernet SHDSL NTU modem with Ethernet interface , 220Â
 DYNAMIX UM SN/Ethernet DC SHDSL NTU modem with Ethernet interface , 48Â
Back to Top  


Also see the products of this group:

DYNAMIX UR-7200 - SHDSL IP DSLAM
DYNAMIX UM SN/3in1/ series - SHDSL NTU with three DTE interfaces
DYNAMIX UM-SNB series - SHDSL.bis NTU  - four or three DTE interfaces (E1/T1, V.35 & Ethernet) in one device
DYNAMIX UM-S - SHDSL modem / router with 1/4 LAN Port and Firewall (optional) (2-wire) 
DYNAMIX UM-SB - SHDSL.Bis modem/router with 1/4 LAN-port (2-wire)
DYNAMIX UM-S4B/4w - SHDSL.Bis modem/router with 4 LAN-port (4-wire)
DYNAMIX UM-SE - 2BASE-TL EFM Network Extender
DYNAMIX 3000 SHDSL TDM Solution
 

If you need further information, please fill out this form below
What kind of information would you like to receive from us?
Please fill out the contact information:
First name/Last name: *
Company: *
E-mail: *
Your phone (country/city code): *
 
* Indicated a required field  

Home | Technologies | Products | Company |  News  |  Contact 

DYNAMIX®