|
|
|
DYNAMIX PL-E (85)
|
| Bridge Ethernet -
HomePlug (Powerline)
(85 Mbps) |
|
Specification | Application
| Ordering information
|
|
View Larger Picture
|
DYNAMIX PL-E (85) Homeplug Ethernet Adaptor provides No New Wires communications to any rooms, over any powerline wires, at the speed of up to 85Mbps.
Targeted at the residential users, it is utilizing Intellon INT5500 high-speed powerline chipset and patented PowerPacket OFDM technology. Fully compatible with Homeplug 1.0 Specifications and specially tailored to delivers speed up to 85Mbps over the most difficult powerline communication environment.
Built-in Quality of Service (QOS) features also provides the necessary bandwidth for multimedia payloads including TV over IP (IPTV), higher data rate broadband sharing, Online-Gaming, VoIP Calls, extending Wireless LANs coverage, Audio-Video transmission across the network as well as Network camera connectivity.
Easy to install and use, it plugs straight in to any existing wall electrical socket while having a low power consumption, it comes with 56 bit DES encryption ensuring that your network communications is free from eavesdroppers and hackers. The AutoMDI/MDIX functionality of the
DYNAMIX PL-E (85) also simplifies and ensures a hassle free installation.
|
User's manual
Quick start
919 Kb
|
|
|
|
| • |
Forward Error Correction (FEC) support |
| • |
Dynamically adapts to the power line environment
to provide the highest data rate possible under all conditions |
| • |
56-bit DEC with Key Management |
| • |
IEEE 802.3 and IEEE 802.3U standard compliant |
| • |
HomePlug 1.0 specification, IEEE 802.0 10/100 Ethernet (100Mbps)
Compliant |
| • |
100Mbps AutoMDI/MDIX Support |
Back to Top
|
|
|
|
|
| Protocol/Standards |
| | HomePlug 1.0 specification, IEEE 802.3 10/100 Ethernet (100Mbps) and IEEE 802.3u Fast Ethernet
Compliant |
| | 10/100 Mbps
AutoMDI/MDIx Support |
| | 85Mbps Homeplug 1.0 compatible |
| Modulation Support |
| | OFDM 256/64/16, DQPSK, DBPSK and ROBO Modulation Scheme |
| Frequency Band |
| | 4.3 Mhz to 20.9 Mhz band |
| Quality of Service |
| | Forward Error Correction (FEC) support |
| | Channel Adaptation ensures that signal integrity is maintained even under harsh noise environment |
| | CSMA/CA with prioritization and ARQ for reliable delivery of Ethernet packets via Packet Encapsulation |
| | Four Level prioritized random access method |
| | Segment bursting and contention-free access ensures high throughput while maintaining low latency response and jitter performance |
| Security Support |
| | 56 bit DES Encryption with key management for secure powerline communications (Utilise Windows 98SE, 2000, ME, XP to enable
encryption) |
| HARDWARE |
| | Intellon
INT5500 Integrated Single-chip Powerline Network
Transceiver |
| | Intellon
INT1200 Analog Front End IC |
| PLATFORM SUPPORT |
| | OS Independent with TCP/IP protocol installed |
| POWER SUPPLY |
| | Switch Mode 90V-264V Supply for Europe/UK/US/Australia plugs |
| LED Indicators |
| | 1 x Power LED |
| | 1 x Powerline Activity Status LED |
| | 1 x Ethernet
Link/Activity Status LED |
| TEMPERATURE |
| | Operating : 0 °C to 40
°C |
| | Non-Operating : -25
°C to 70
°C |
| HUMIDITY |
| | Operating : 30% to 80% Relative Humidity
(Non-Condensing) |
| | Non-Operating : 30% to 95% Relative Humidity
(Non-Condensing) |
|
Back to Top
|
|
|
|
|
Back to Top
|
|
|
|
| DYNAMIX PL-E(85) |
Bridge Ethernet - Powerline (85 Mbps) |
|
Back to Top |
|
|
Also see the products of this group:
|
|
Dynamix UM-A Plus/PL (Turbo)
ADSL2/2+ HomePlug modem/router
|
|
DYNAMIX PL-E(85)
Bridge Ethernet - Powerline (85 Mbps)
|
|
DYNAMIX PL-200AV New!
Bridge Ethernet - Powerline AV (200 Mbps)
|
|
|