|
The broken markers, twist drills, and many othesr can be removed extreme quickly.
Rapid application on the table, vertical and radial drilling machines, the milling and boring machines, boring machines on the magnetic base and the special machines.
Do not panic, if your tool was broken!
While the machining on the machines, the installations and the systems, and also in the auto industry it is a usual phenomenon, when the broken tool remains in the expensive articles. This occurs in each company and at each plant. The worst attempt is to correct the situation in the following way - to extract the stucked tool from the hole with the aid of the hammer or the cutting pliers. This can finally spoil the expensive article, and all that will remain for you is the scrap metal.
The proposed device is the professional solution for the averting of idle times and extraction of the broken parts. This is the mechanized tool for the extraction of the broken tool in the very short time, moreover without the damage of article.
Better performance on the new vibration technology! Vibration head remains cold even with the continuous operation!
Sleeve (to 5 m) for the work on boring machine or for the installation works |
Holder |
Handle, established at the ideal height in the relation to the involving nut |
Shaft of the cylinder with a diameter of 12 mm (standard) for the clamp in the holder or collets or MK 2/MK-E directly in the cartridge. |
Simplicity of the application:
- Hollow copper electrode is pressed in the vibration head, which has smaller diameter than the broken tool.
- Only core of the broken tool is crushed with this destructive method.
- In the process of working the cut edges remain free and they can be easily extracted.
Electrode does not come into contact with the middle of the hole, and thus, the thread is not damaged. Boring emulsion commonly is used as coolant. |
Large vibration-proof functional lamp for the indication of the optimum removal of the material |
Two-bearing supporting case-hardened vibration steel framework for the constant work |
Involving nut for the collet and the electrodes |
Hollow copper the electrode with a diameter of up to 10 mm. It disappears in the vibration head |
Available boring emulsion |
model er 230 s
The model has enormous possibilities for the thread to M 20. It is light and convenient. Ideally it approaches as "unique solution" for many workshops. Generator: 220/230 V, alternating current; 3,6 kVA, 16 A, 50 Hz; Overall sizes: L of 450 X W of 300 X H of 260 mm; the weight of 22 kg; two colours RAL 3002 and 7035.
model er 400 t
Power unit with the three-phase current and the increased power. For the removal of tools approximately to M 40, the carbide tools and the deeply drilled openings.
Generator: 380/400 V, three-phase current; 6,0 kVA, 16 A, 50 Hz; Overall sizes: L of 450 X W of 300 X H of 260 mm; the weight of 28 kg; two colors RAL 3002 and 7035.
In the presence different operating currents.
The generators, which give to you the additional positions:
• durable aluminium housing. Always cold because of the airflow
• the great destructive ability. There are no decreasing effectiveness magnetic pour on, smaller heating
• the easily cleaned working table. For the adjustment of thread, size of electrode and degree of destruction
• centralized control master switch, 6- stepped switch, the switch of pump, temperature regulator, connection for checking the deep openings
It is completed and ready to work!
Base equipment
It is necessary to order additionally only electrodes and collets (see translated below table for determining of the dimension).
1. Generator.
Durable and cold - with this stress! In compact housing
2. Vibrating head.
Additional power with the advanced vibration technology!
Holder with the cylindrical shaft with a diameter of 12 mm.
3. Pump of cooling. For the intensive flow!
It has the 2-meter suction hose with the valve in the lower end of the pipe.
+ 2-meter compressor hose with the quick-disconnect fitting
+ the 2-meter feeding hose from the generator to the vibration head (in the presence - to 5
meter)
+ the 2-meter grounding cable with the clamp
+ 1 pipe dog on 19 mm, 1 pipe dog to 24 mm and 10 anti-splash packets.
Special accessories.
4. Compact cart. Mobile in any direction! For the rapid transport to the place of work. Tubular handle with the plastic profile; base for the generator with the rubber packing for averting the slip, average shelf for the box with the tools, base support for the pump of cooling and tank with the cooling fluid. Holder of the vibrating head.
5. Kit for the tools. It contains things in the cleanliness!
It has 13 internal departments for the electrodes and dual departments for the tools. Has movable knob and the quick-opening lock.
6. Tank for the cooling fluid. For the situations, when there is no cooling fluid!
2 cameras for the suction and the reverse draining. With a capacity of approximately 30 liters, it has 2 knobs for the seizure.
7. lamp to 3,5 v for checking the deep openings.
It is better to appear circumspection than to regret!
With the cartridge, a diameter of 5 mm and a length of 35 mm. For illuminating the openings after destruction. Also with 230 V converters for the universal inspection work.
|
