FAA certification of aircraft interiors designed and manufacture

[/rus/about_sert.htm#] history archive certification and maintenance patenting and licensing enterprise history products aircraft description technical characteristics aircraft schematics passenger salon details of interior 3D model About us VIP Aircraft Interiors Certification and Maintenance The certification of VIP aircraft interiors design, production and maintenance procedures and their conformity to aviation rules and regulations and type certificates is very important for all VIP aircraft interiors designers and manufacturers, and InterAMI Interior is no exception. The certification of VIP aircraft interiors and their elements - ceiling and wall panels, leather armchairs, electronic equipment of passenger cabin, etc. - is done in accordance with procedures set by aviation rules AR-21 and federal aviation rules FAR-25 for the certification of the aircraft interiors as a part of the aircraft. The certification procedures are carried out in close cooperation with aircraft manufacturers and type certificate holders. The design and manufacturing of VIP interior of Yak-40 aircraft is accompanied with FAA conformity certificates: thus, all vendor items and thermoplastic materials used in aircraft furnishings have FAA certificates ( FAR 25.853 ), all passengers seats have TSO C127à certification. All interior elements are tested by Russian Federal Institute of Aviation Materials Science. The scientific and technical support in VIP aircraft interiors design, production and certification is also provided by Kharkov State Air Space University, Kharkov State Aircraft Manufacturing Company ( KSAMC ), and ANTK Antonov. InterAMI Interior has certified procedures for interior repairs and refurbishment (replacement), installation and modification as well as warranty and post-warranty interior servicing and maintenance. VIP Aircraft Interiors Design and Production - Quality Assurance System The quality assurance system for all stages of design, development, production, assembly and maintenance of VIP aircraft interiors was created and adopted by InterAMI Interior in 2000. The main purpose of this system was to systematize all quality requirements to all stages of aircraft interior design and manufacturing process. The compliance of our quality assurance system with international standard ISO 9001-94 is confirmed by certificate S2000.608 issued by TNO Certification. VIP interior of Yak-40 aircraft was created and installed in full accordance with this certified quality assurance system. High quality of products and services is the most important factor of company success and longevity, and it has never been underestimated by InterAMI Interior. From the day of its foundation InterAMI Interior team strived to satisfy and exceed the most demanding needs of customers, providing even more than they could expect from VIP aircraft interior. The modern vehicle interior, and especially aircraft interior, not only must have aesthetical and functional value, but also possess a number of special qualities. All materials and parts must be environment-friendly, durable, fire safe and noise-absorbing to ensure the comfort and safety of passengers during their travel. One of the most efficient methods of quality assurance is defect prevention at all stages of technological process and use of aviation-certified materials and parts. VIP aircraft interiors installation, maintenance, repairs and replacement also must be carried out quickly and efficiently and thus are subject to quality assurance system guidelines. On January 16, 2001 Kharkov State Center of Standardization, Metrology and Certification issued a certificate of compliance No. UA2.003.207 of InterAMI Interior quality assurance system with DSTU standard 9001-95 . On May 21, 2001 the Certification Agency of Tambov Center of Certification and Metrology issued the certification of compliance with GOST R ISO 9001-96 No. ROSS UA. IS50. K0002 .