This version of the page http://en.el.ua/svetodiodnye_moduli (0.0.0.0) stored by archive.org.ua. It represents a snapshot of the page as of 2015-05-21. The original page over time could change.
  • Touch Kiosks

  • LED Lighting

  • LED screens


  •  Download technical
    specifications fixtures 2011

  •  Download IES files 2011
  •  The calculation of return:
  •  The advantages of LED lighting
  •  Examples of lighting projects
  •  Certificates
  •  LED Lamps

LED assembly units for landscape highlighting

Designed for general and ornamental interior highlighting, used for street illumination – landscape highlighting, advertisement highlighting of light-boxes, illumination of big-boards etc. 10-13W illuminator with incandescent or halogen lamp is equivalent to 1W LED assembly unit.

LED assembly units are universal; they can be used as without their body so they can also be mounted at different bodies and constructions.

Replacement of almost any illuminator’s filling is possible because of the variety of the assembly units’ configurations.

 

Article: 1LED 30x30 3LED 30x30 5 LED 370x20 5LED 120x30 3LED 252x20 6LED 252x20
Power source: Direct current 350mA
Energy input: 1W 3W 5W 5W 3W 3W
Number of LEDs: 1 pcs. 3 pcs. 5 pcs. 5 pcs. 3 pcs. 6 pcs.
Luminous efficiency: to 150 lm/W to 82 lm/W
LED luminous flux: to 150lm to 450lm to 750lm to 750lm to 450lm to 240lm
Angles of radiation: 80°, 170° 170° 80,170 grades 170 grades 135 grades
Emission colour: White warm, cold, red, orange, yellow, green, teal, blue, dark blue
Colour rendering index CRI: 80Ra
LED: OSRAM (Germany)
Temperature operative limits: from -40°C to +50°C
Overall size: 30x30 30x30 370x20 120x30 252x20 252x20
Service life: 100000h.
Warranty: 18 m.
Allocation: used with the help of thermo-stripe,mounted onto any heat-removing surface

Compliance certificate UkrSEPRO №UA 1.066.0180552(1)-12
Compliance certificate TU U 31.5-31517453-003(004):2009
Compliance certificate GOST Р № ROSS UA.АВ41.Н00102(3)
Compliance certificate CE Е014/01(02)
Declaration of Conformity CE № JIC02220


With LEDs illumination you have:

  • electricity saving in 5-10 times!
  • high light efficiency
  • high colour rendering
  • high strength and vibration resistance
  • absence of starter currents and instant start
  • absence of stroboscopic effect
  • long-life performance
  • low heat emission
  • low temperatures resistance
  • voltage drops immunity
  • environmental safety
  • Payback calculation LED-STREET-23

Electronic light, on request, manufactures custom lighting products using LED.

Or…You can make the LED illuminator by YOURSELF


Installation requirements for LED illuminators/assembly units.

Polarity observance:

Not observing the connection polarity the LED breakdown is possible. On the LED from the side of the negative terminal under the lens you can see a spot. For right LED illuminator (assembly unit) connecting there are special plugs that are installed on every illuminator (assembly unit) and on the electric power supply.

 

Enlarge the connecting scheme  Enlarge the connecting scheme2

Observance of the LED quantity in the set:

Not abiding the set amount of LEDs for the specific power supply model the outage of the power supply or/and LEDs breakdown happens. One or more LEDs may be installed in the illuminator (assembly unit). When connecting the illuminators (assembly units) at the specific supply it is necessary to quantify the number of LEDs in the illuminator.

You may install at least 4 and at most 9 LEDs at the power supply JA-32350U.

You may install at least 2 and at most 3 LEDs at the power supply JA-12350U. When installing the illuminator (assembly unit) with one diode, special ballast is installed additionally for this power supply.

You may install at least 10 and at most 24 LEDs at the power supply JA-80350M. 

When installing the illuminators (assembly units) with red and yellow LEDs the quantity of the diodes should be multiplied in one and a half time for every power supply.

You mustn’t connect the power supply with no illuminators (assembly units) connected to the electric main of 220V.

Temperature conditions observance:

When overheated the LEDs’ service life is shortened and the breakdown is possible.

The LED assembly unit is to be installed with the use of thermo-stripe onto the heat removing surface.

Order form