Show as:
- Список
- Иконки
Accessories for ventilating systems
- Forward link
- Share
Reader
TwitterBuzzLinkedInFacebookLivejournalDeliciousBookmarks
Silencers
A silencer is used for the noise absorption generated by the ventilation units and spreading via the air ducts of the ventilation system.
Filters
Panel-type and pocket-type air filters are applied for purification of supply and in some cases exhaust air in ventilation and conditioning systems of round and rectangular section.
Dampers
Backdraft dampers and gravity dampers are designed for automatic shutoff of air ducts and prevention of air back draft at no air flow.
Air shutters
Air shutters are designed for manual air flow controlling or automatic round air duct shutoff.
Access doors
Plastic and metal access doors for accessing concealed equipment and utility lines. Special offers for ceramic tiles.
Flexible connectors
Flexible connectors are designed to disable the vibration transmission from fans or ventilation units to ducts as well ad for the partial compensation of thermal deformation in the duct.
Clamps
Clamps are designed for easy and reliable mounting and connection of various ventilation system elements of round section.
Plate heat exchangers
Plate heat recovery elements PR with cross-shaped air passage is designed for exhaust air heat recovery in ventilation and air conditioning systems.
Mixing chambers
Mixing chamber is designed for mixing (recirculation) portion of exhaust air with the outer air in the required proportions.
Water heaters
Water heaters are designed for heating the incoming air in ventilation systems with round and rectangular cross-section. These heaters can also be used as warmers in inlet and inlet-exhaust units.
Electric heaters
Electric heaters are designed for heating the incoming air in ventilation systems with round and rectangular cross-section.
Water coolers
Air coolers are designed for cooling the incoming air in ventilation systems with rectangular cross-section. These air coolers can also be used as coolers in inlet and inlet-exhaust units.
Freon coolers
Air coolers with direct evaporative cooling are designed for cooling the incoming air in ventilation systems with rectangular cross-section. These air coolers can also be used as coolers in inlet and inletexhaust units.
Mixing sets
The mixing unit USWK is designed for smooth heat medium flow control in ventilation systems equipped with water heaters or coolers for supply air temperature regulation.
Air flow regulators
Air flow regulator is a multi-flapper valve with counter-rotating flappers and is designed for air flow rate control or for shutting off the rectangular ventilation ducts automatically.
Silencers
Filters
Dampers
Air shutters
Access doors
Flexible connectors
Clamps
Plate heat exchangers
Mixing chambers
Water heaters
Electric heaters
Water coolers
Freon coolers
Mixing sets
Air flow regulators
Thank your for your time and your wish to improve our site.