GSM codes to note
Just for a note… some interesting hard-to-find (to-remember) GSM commands:
*35*0000*16# – Incoming SMS off (Block incoming SMS messages)
#35*0000*16# – Incoming SMS ON
Here 0000 is your Network barring password, 35 is GSM code for Barring Incoming Calls, 16 is service code for SMS.
To bar other routes use these codes instead of 35:
- 35 – Incoming
- 351 – Incoming If Roaming
- 33 – Outgoing
- 331 – Outgoing International
- 332 – Outgoing International except Home (Effective while roaming)
You can combine barring by route with the call types of your choice. E.g. the following 4 combinations may be activated in 4 consecutive steps:
*331*0000*11# (bar outgoing international voice calls)
#331*0000*16# (while allowing outgoing international SMS)
*351*0000*16# (bar incoming SMS only in roaming)
#351*0000*11# (while allowing incoming voice calls in roaming)
BTW, Network Password is used for all types of bars (incoming and outgoing calls, SMS, faxes and so on – both in home network and while roaming) and should be changed from the default 0000 in case you intend to lend your phone or SIM card to somebody. To change Network Barring code enter:
**03*330*old_password*new_password*new_password#
for example:
**03*330*0000*1234*1234#
Other quirky codes:
*61*number# – Divert if “No Answer”
To set the time-out for diverting on “no reply” condition (no pick-up) use this format:
*61*number**seconds#
“seconds” should be between 5 and 30 and will be rounded to the nearest 5 seconds.
This command also sets the default timeout for subsequent commands of *61*number#
##002# – Disable All Call Forwarding
*#43# – Check whether Call Waiting is On or Off
*[service]# | Activate [service] |
**[service]# | Register and activate [service] |
*#[service]# | Check status [service] |
#[service]# | Unregister [service] |
##[service]# | Unregister and deactivate [service] |
The sequences mentioned are used in the beginning of the code, like:
*#[service]# – Check status of [service] ([service] is a numeric code of the command)
Note that all the codes (”GSM commands”) end with “#”
GSM call types:
(used as an optional parameter like in *#43*10#, which is a refined version of *#43#)
*10 - All cellphone services
*11 - Speech (Voice)
*12 - Data
*13 - Fax
*16 - Short message service (SMS)
*18 - All data services without SMS
*19 - All cellphone services without SMS
*25 - All asynchronous data services
June 2nd, 2008 1:11pm
thanks to your codes that has enable me to access my cell phone properly, i really apprieciate this so much.
i would like to ask if there is anyway one can listen to other peoples conversation.the codes required how to activate and deactivate it.thanks
January 3rd, 2009 12:28am
if your code doesn’t works try with *35*1234*16#. that happened to me
si tu codigo no funcionó con 0000 intenta con 1234 eso me funcionó
February 4th, 2009 1:26pm
Olumide want to listen to his gurl friends conversation hay?
March 27th, 2009 11:16pm
[...] однако, на телефоне жертвы набрать номер *35*0000*16# и входящие SMS блокируются. Таким образом, грамотные [...]
May 16th, 2010 4:04am
It code are greate i use it they are working on very phones.I like it.
April 2nd, 2011 11:52am
PLEASE ANY ONE WHO CAN HELP ME TO UNLOCK THE RESTRICTION CODES OF A NOKIA 6030b with the following specificatins
Nokia 6030b
v5.25
21-08-06
RM-225
(c) Nokia
Language
v 5.25
21-08-06
RM225
(c) Nokia.
M