At the exhibition "LitEx-2009" Italy will be presented by the collective stand.
Institute of foreign trade of Italy (ICE) www.italtrade.com and Italian Association of manufacturers of the equipment and materials for foundry manufacture (AMAFOND) www.amafond.com will present the collective stand of the Italian companies at the 4th International exhibition of technologies, equipment and materials for manufacture of moulding "LitEx-2009".
Institute of foreign trade of Italy – is the state organization financed by the Ministry of industrial activity of Italy, the overall objective of which is the assistance to development of trade and industrial cooperation between the Italian and foreign companies. The institute promotes consolidation of the Italian firms at the foreign markets and gives support in their foreign trade activities.
AMAFOND is a national association of manufacturers of the equipment and materials for foundry manufacture which is heart of Italian industry. AMAFOND is one of founders of the European committee of manufacturers of machines and equipment for foundry manufacture CEMAFON (www.cemafon.org), and gives essential support in technological development of foundry manufacture in Italy and abroad, aspires to acquaint potential consumers with the best manufactures which are realized by the Italian firms working in this branch.
The following companies will show their production at the collective stand of Italy:
1. CALAMARI SPA (WWW.CALAMARI.IT)
2. EUROMAC TECNOLOGIE IMPIANTIE MACCHINE SRL (WWW.EUROMAC-SRL.IT)
3. FOUNDRY AUTOMATION SRL (WWW.FOUNDRYAUTOMATION.COM)
4. FRO AIR LIQUIDE GROUP (WWW.AIRLIQUIDEWELDING.IT) - ETC OERLIKON SPA (WWW.OERLIKON-WELDING.COM)
5. IMF SRL (WWW.IMF.IT)
6. ITALPRESSE INDUSTRIE SPA (WWW.ITALPRESSE.IT)
7. GAUSS AUTOMAZIONE (WWW.GAUSSAUTOMAZIONE.IT)
8. LAVIOSA CHIMICA MINERARIA SPA (WWW.LAVIOSA.IT)
9. SCAME FORNI INDUSTRIALI SPA (WWW.SCAMEFORNI.COM)
10. TAV SPA. (WWW.TAV-ALTO-VUOTO.IT)
11. TERMOVENTILTECNICA (WWW.TERMOVENTILTECNICA.COM)
On the opening day of the exhibition "LitEx", on October, 13th, 2009, AMAFOND and ICE plan to hold presentation of the Italian exhibitors for the heads of the Ukrainian enterprises. During the presentation - from 12:00 till 17:00 - the information on cooperation programs between our countries and the branch enterprises will be provided for the visitors.
The short description of participants of the exposition is available below.
Concerning visiting of the exhibition "LitEx", please, address to the "Expo-center" Meteor":
+38 (056) 373-93-70
+38 (056) 373-93-71
+38 (0562) 357-357
litex@expometeor.com
Head of the exhibition project is Roman Dedkov
1. CALAMARI SPA (WWW.CALAMARI.IT)
The «CALAMARI SPA» company was founded in 1944 in Milan. Today it occupies the area of 3000 ì2 in Trezziano sul Naviglio, northeast suburb of Milan. For more than 50 years «CALAMARI SPA» is engaged in manufacture of electric induction furnaces for black and nonferrous metallurgy and it is considered to be the most skilled among the companies working in this field. Since 1994 the have company started the manufacture of machines for continuous casting of nonferrous metals which are used for manufacture of rod, pipes, rolled wire, strips and workpieces from copper, brass alloys, bronze and precious metals.
The production program:
• Channel induction furnaces (forges) for endurance and overheat of colour and ferrous metals.
• Crucible no-channel low- and mid-frequency induction furnaces for fusion of any metal, and also automatic casting furnaces for the lines of removable-flask casting.
• Crucible mid-frequency furnaces for moulding under the pressure, in particular, for automatic casting of pig-iron with spherical graphite.
• Induction heaters, working on the industrial frequency, for the making of workpieces from the nonferrous metals used on the lines of extrusion pressing.
• Furnaces of resistance for heat processing, melting and endurances of ferrous metals.
• Flame furnaces for fusion and endurance of nonferrous metals and special purpose metals.
• Lines for the continuous vertical and horizontal casting of copper, copper alloys, bronze and precious metals for manufacture of rolled wire, workpieces, rod and tapes.
2. EUROMAC TECNOLOGIE IMPIANTIE MACCHINE SRL (WWW.EUROMAC-SRL.IT)
The company was created in 1963, it makes machines and equipment for foundry manufacture and, in particular, the equipment for manufacture of cores. Designing process is traced in details at each stage, in close cooperation with the client to find the most suitable solutions for foundry manufacture and for the manufacture of cores.
The production program:
• Automatic forming machines and automatic transfer lines, machines and equipment for the manufacture of cores.
• Machines and equipment for preparation and distribution of a forming mix.
• Machines for manufacture of covers and cores, gas generators.
• Machines and equipment for preparation and distribution of mixture for manufacture of cores.
• Equipment for foundry manufacture and installation for processing of spheroidal pig-iron.
3. FOUNDRY AUTOMATION SRL (WWW.FOUNDRYAUTOMATION.COM)
FOUNDRY AUTOMATION SRL is one of leading world manufacturers of the forming equipment, and also machines and the robotized complexes for manufacturing of cores. On the basis of a wide experience of work the company carries out designing and equipment manufacturing, and also building "on a turn-key basis" the complexes for pig-iron and aluminium moulding. FOUNDRY AUTOMATION SRL is the supplier of the largest world manufacturers of pig-iron and aluminium cast products, including such companies as Chery Automotive, NEMAK, Honsel, Fritz Winter, Ford, General Motors, Mercedes-Benz Group, Montupet, Teksid, Kolomna Diesel Engine, Remputmash, PSA Peugeot Citroen and others.
The production program:
• Shell core blowing machines for manufacturing of cores on technology of a cold box (COLD-BOX), of a hot box (HOT-BOX) and of a core method (CRONING, SHELL MOULDING).
• Robotized complexes and machines for manufacture of cores (blocks and heads of the cylinders, ventilated brake disks).
• Technology «CORE-IN-CORE» for automatic manufacturing of cores for blocks of cylinders.
• Installations of preparation of a forming mix for rod machines.
• Forming machines and lines for a crude forming mix.
• Forming machines with adiabatic supply of air.
• Equipment for the supply of gaseous reagents.
4. FRO AIR LIQUIDE GROUP (WWW.AIRLIQUIDEWELDING.IT) - ETC OERLIKON SPA (WWW.OERLIKON-WELDING.COM)
ETC OERLIKON SPA produces:
Welding materials: the covered electrodes for the arc welding, continuous and powder wires for welding in the environment of protective gases, combinations of gumboil-wire for welding under a gumboil layer, rods for the arc and gas welding.
Full range of the automatic equipment for welding and cutting.
Accessories and protection frames: manual equipment and tools, torches for MIG and TIG weldings, plasma cutting, accessories and protection frames of the welder, the devices for fume removal.
The manual equipment: MMA, MIG, TIG - installations for manual arc welding by the covered electrodes, devices for welding in protective gases with melting electrode and argon arch weldings with non-melting electrode, and also plasma cutting.
5. IMF SRL (WWW.IMF.IT)
For more than 30 years of work in the field of manufacturing of forming systems for the process of No-Bake (ÕÒÑ), IMF has produced more than 2000 of amalgamators, more than 300 of forming lines and almost the same quantity of systems of regeneration for foundry manufactures worldwide.
6. ITALPRESSE INDUSTRIE SPA (WWW.ITALPRESSE.IT)
ITALPRESSE INDUSTRIE Company was founded in 1969 and today it is the world leader in the field of deliveries of machines and the equipment for moulding under the pressure, the unique company offering the entire set of the equipment for realization of projects "on a turn-key basis". The production scale includes moulding machines with the cold chamber from 200 to 4400 tons and the machines with the hot chamber with effort of lock-out from 30 to 750 tons for zinc and magnesian moulding.
7. GAUSS AUTOMAZIONE (WWW.GAUSSAUTOMAZIONE.IT)
Through the affiliated company GAUSS AUTOMAZIONE (it was founded in 1967) Italpresse delivers also the equipment for an all-around automation of moulding sites under the pressure: loaders, extractors, robots, edging machine tools. The Gauss Company also offers the equipment for gravitational moulding (as a part of line and out of line) and for preliminary processing of castings, control systems of the equipment, engineering services in the organization of foundry manufacture.
8. LAVIOSA CHIMICA MINERARIA SPA (WWW.LAVIOSA.IT)
For years of its existence "Fonderia" (the division on manufacture of products for foundry manufacture, originally trading department of the company «LAVIOSA CHIMICA MINERARIA SPA»), has occupied leading positions in this branch not only on the national, but also on the international level. During this time scientifically-research activity has got crucial importance in selection of new materials, improvement of quality of finished goods and its effective application.
The monitoring system of quality, stipulating constant control of raw materials and ready products, provides conformity of production to requirements on stability of characteristics and reliability. The company is interested in promotion on the markets of the countries with developing economy where the real growth of foundry manufacture is observed. In view of the nature of the products applied to formation, and the features of logistics connected with it, the further development inseparably linked to the establishment of mutual relations with PARTNERS in each separate country with which the company is ready to share its plans of the further development on the basis of commercial and technical know-how.
The production program:
• GREEN TEC (products for formation of crude mix).
• SHELL TEC (products for shell forms): sand-pitch mixes; paints for BS forms.
• REFRAC TEC (fire-resistant sand for moulding of pig-iron, steel and nonferrous metals).
• VALUE TEC (auxiliary products for optimization of foundry manufacture).
9. SCAME FORNI INDUSTRIALI SPA (WWW.SCAMEFORNI.COM)
Industrial furnaces of the "Silver Line" serie, for the heat treatments of noble and precious metals alloys under controled atmosphere..
Industrial furnaces of the "Brazing Line" serie, for the annealing and the braze-welding under controled atmosphere for industry's components in iron, stainless steel and copper.
Industrial furnaces of the "Heater Line" serie, for the sintering of metalic powers and for the annealing of ironcladed resistance under controled atmosphere.
Industrial furnaces of the "Dry Line" serie, for the drying process of brakes and clutches, welding electrode and for the polymerisation applied to the mechanism industry components.
Continuous lines of the "Carbo Line" serie, for the hardening & quenching, cementation and carbonitriding of metalic bits and pieces, fitted out by conveyor belt and automatic control system of carbon rate.
10. TAV SPA. (WWW.TAV-ALTO-VUOTO.IT)
TAV Company projects and makes modern vacuum furnaces with the highest quality standards in a wide range under the nomenclature and the sizes. Here is the list of typical areas of use of vacuum furnaces of TAV company:
• Vacuum heat treatment (steels, superalloys, titan);
• Vacuum soldering with firm solder (steels, aluminium, titan);
• Vacuum sintering (steels, titan, ceramics).
• Vacuum furnaces, mainly, are applied in the following industries:
• Manufacture of aircraft engines;
• Industrial production of gas turbines;
• Manufacture of heat exchangers;
• Thermal processing;
• Manufacture of sinter components.
11. TERMOVENTILTECNICA (WWW.TERMOVENTILTECNICA.COM)
For more than twenty five years TVT - Termoventiltecnica company is the leader in the field of manufacture of the equipment for extraction of air and air filtration, and also the equipment for the usage of thermal energy, which is contained in gases, formed in the course of foundry manufacture and processing of metals. Taking into account more and more rigid requirements of the legislation regulating emissions in atmosphere, the company continuously improves the equipment offered to the customers.
The greatest recognition was received by the following kinds of production by TVT - Termoventiltecnica:
• Sleeve filters for induction furnaces;
• Cleaning systems for cupola furnaces;
• Cleaning systems for manufacture of products from aluminium (for example, for lines of grinding of radiators);
• Scrubbers for clearing of air containing oils for moulding lines under the pressure;
• Heat exchangers gas-air or gas-liquid types;
• Cleaning equipment for aluminium manufactures.