|
AUTOMATIC MACHINE FOR MANUFACTURE OF WIRE NETTING А0115: |
AUTOMATIC MACHINE FOR MANUFACTURE OF WIRE NETTING is
designed for manufacture of nettings with square and rhombic meshes
of the "Rabitsa" type out of wire of 2 - 3 mm in diameter with
rated mesh side dimension of 20 - 60 mm. |
|
MATERIAL USED: |
Low carbon non-heat treted wire, or galvanized wire of normal accuracy. |
|
ADVANTAGES: |
1. The feed is improved by means of application of special unreelers.
2. Possibility of bending the cut netting ends.
3. Possibility of reeling of the manufactured netting into rolls due to a special reeling device.
4. Safety of maintenance is provided by reliavle casing of dangerous operation areas.
|
|
SPECIFICATIONS: |
Wire diameter, mm |
2,0-3,0 |
Netting width, max, mm |
2000 |
Mesh side dimension, mm |
20-60 |
Reeling knife revolutions per min. |
maximum
minimum |
800
250 |
Number of gears of reeling knife |
6 |
Way of knife change |
ступенчатый |
Electric motor power, kW |
4,5 |
Overall dimensions (without reeler and unreeler), mm |
4300x1650x1600 |
Mass, kg |
3500 |
|
|
|
1. AUTOMATIC MACHINE FOR MANUFACTURE OF WIRE NETTING is delivered with a set of tools for manufacture of wire netting with square meshes of 45 or 60 mm one side. The tools for production of wire netting of different dimensions and shape are delivered to a separate
order.
2. The machine capacity depends on mesh demension, netting width, quality of tools.
|